Skip to product information
Autophix BT500 Pro OBD2 Scanner and Battery Tester
Checking engine faults and your battery, starter and alternator.
$269.95
Will it work on my car?
Choose this if
- You want to test battery health, cranking and charging, not just read codes
- You run flooded, AGM, gel or EFB batteries
- You want to check 24V cranking systems as well as 12V
Consider instead
- Outback 9000 if you want fault causes explained and a rubber-covered unit
- a professional scanner if you need ABS, airbag or service resets
Pickup currently not available
The BT500 Pro combines a full OBD2 scanner with a proper battery and charging-system tester. One tool diagnoses engine faults and tells you whether your battery, starter or alternator is the problem.
Battery, cranking and charging tests
- Clamps straight onto the battery terminals
- Tests 12V batteries: regular flooded, AGM flat plate, AGM spiral, gel and EFB
- Shows battery health, state of charge, voltage, internal resistance and rated CCA
- Cranking test on 12V and 24V systems
- Charging (alternator) test under load and without load, including ripple
OBD2 functions
- Reads and clears fault codes, with definitions on screen
- Live data: O2 sensors, RPM, coolant temperature, vehicle speed and more
- Freeze frame, emissions (I/M) readiness with a one-touch button, EVAP and on-board monitor tests
- Vehicle information (VIN, CIN, CVN)
- Printable diagnostic reports via a computer
- Multilingual menus and code definitions
Vehicle compatibility
Works on most OBD2-compliant vehicles with a 16-pin diagnostic port.
- Australian and New Zealand vehicles: 2006 and newer
- North American vehicles: 1996 and newer
- European vehicles: 2001 and newer (petrol), 2004 and newer (diesel)
Specifications
- Display: 2.8" colour TFT
- Power: 6 to 30V, supplied by the vehicle battery
- Operating temperature: 0 to 50°C
- Includes alligator clips