The best OBD2 scanner is the one that matches your car and the job. For reading a check engine light on a petrol car built from 2006, or a diesel from 2007, a simple code reader is enough. Add Bluetooth for phone use, a battery tester for touring, or a brand-specific scanner for ABS, airbag and service work.
A quick note on what this guide is. Autophix Australia sells the Autophix range, so this is a buying guide to that range, not an independent review of every scanner on the market. It explains how to work out what you need, what each tool can and can't read, and where a cheaper tool is the better choice.

Does OBD2 work on your car?
OBD2 (on-board diagnostics) is the self-checking system in your car's engine computer. When it finds an emissions-related fault, it stores a diagnostic trouble code (DTC) and usually turns on the check engine light. Every OBD2 scanner reads those codes through a standard 16-pin port, normally under the dash on the driver's side.
The Australian dates: ADR 79/01
In Australia, OBD came in through Australian Design Rule 79/01, which adopted the European emissions rules (UN ECE Regulation 83), including their on-board diagnostic requirements, for light vehicles. The rule applied in stages:
- Petrol, LPG and natural gas vehicles: new models first produced from 1 January 2005, then all vehicles produced from 1 January 2006.
- Diesel vehicles: new models first produced from 1 January 2006, then all vehicles produced from 1 January 2007.
So as a rule of thumb, a petrol car built in 2006 or later and a diesel built in 2007 or later should talk to a generic OBD2 scanner. Many earlier cars have the 16-pin port too, especially models also sold in the US or Europe, but having the port doesn't guarantee the car uses a standard protocol. The ADR also excused bi-fuel vehicles running on LPG or natural gas from the OBD checks while in gas mode, so a dual-fuel car may only report properly on petrol.
Japanese imports and JOBD
Grey and private imports from Japan, such as Japanese-market Land Cruisers, Hiluxes, Hiaces and Elgrands, were built to Japanese rules, not the ADRs. Many from the 2000s use JOBD, Japan's version of on-board diagnostics. It uses the same 16-pin connector but the scanner needs to support JOBD to read it reliably. The Autophix OM127 adds JOBD for this reason. Older Japanese imports with a different-shaped diagnostic plug won't connect to any of the scanners in this guide.
Check before you buy
- Find the 16-pin port. It's usually under the dash on the driver's side, within reach of the steering wheel. Our step-by-step guide to using an OBD2 scanner shows where to look.
- Check the build date on the compliance or build plate, and whether the car was sold new in Australia or imported.
- Note the fuel type, and for dual-fuel cars, plan to scan on petrol.
- Write down what you actually want to read: engine codes only, or ABS, airbag, transmission and service functions too.
What a scanner can and can't do
All scanners are not equal, and the gap between them is mostly about which computers in the car they can talk to.
Code readers: engine only
A code reader talks to the engine computer through the standard OBD2 functions. It reads and clears engine codes, and the better ones show live data, readiness monitors and freeze frame data. That covers the check engine light, which is the most common reason people buy a scanner. It does not read the ABS, airbag (SRS), body or transmission computers on most cars, and it can't do service resets.
All-system scanners
An all-system scanner uses the manufacturer's own diagnostic language to reach every computer it supports: engine, transmission, ABS, airbags, body, and more. It can also run service functions such as oil light resets, electronic park brake (EPB) service mode, steering angle calibration, DPF regeneration and injector coding. Because those languages are brand-specific, these scanners are built for one brand or a set list of brands.
What no scanner does
A fault code tells you which circuit or system the computer is unhappy with. It doesn't tell you which part to replace. A P0171 lean code, for example, can come from a vacuum leak, a dirty airflow sensor or low fuel pressure. Treat the code as the starting point for diagnosis. Our guide to OBD2 fault codes covers the common ones.
How to choose: four questions
- What's the car? Make, build year, fuel type, and whether it's a Japanese import. This decides between the OM123, OM127 or a brand scanner.
- Which warning light do you care about? Check engine light only: any code reader will do. ABS or airbag light: you need the 3210Pro (on supported makes) or an all-system scanner.
- Who will use it, and where? A handheld with its own screen suits a glovebox and anyone who doesn't want an app. A Bluetooth scanner suits people who are happy on their phone.
- Do you want to do your own servicing? Oil resets, EPB, DPF regeneration and injector coding all need an all-system scanner for your brand.
Autophix scanners compared
This table only lists functions confirmed in our product data. If a function isn't listed against a scanner, don't assume it has it. Check the product page or ask us before you buy.
| Scanner | Type | Systems read | Other functions | Best for |
|---|---|---|---|---|
| OM123 | Handheld code reader | Engine only | Live data, readiness, freeze frame, VIN. All five OBD2 protocols | Glovebox scanner for Australian-delivered cars from 2006 |
| OM127 | Handheld code reader | Engine only | As the OM123, plus JOBD (16-pin port only) | Japanese-market imports |
| 3210Pro | Bluetooth, phone app | Engine. ABS, airbag and transmission on some makes (Ford, GM, Chrysler, Toyota, Mercedes) | Live data, basic voltage check | Phone users, and ABS or airbag lights on supported makes |
| Outback 9000 | Colour handheld, rubber cover | Engine only | Likely cause shown on screen, basic voltage check | Touring and glovebox use |
| BT500 Pro | Handheld scanner and battery tester | Engine only | Battery, cranking and charging test. 12V and 24V cranking. Flooded, AGM, gel and EFB batteries | Dual-battery setups, caravans and fleets |
| 9360 Toyota | All-system, single brand | All systems | Oil, EPB, steering angle and TPMS resets, DPF, injector coding | Toyota owners who service their own vehicle |
| 9150 Ford | All-system, single brand | All systems | More than 30 functions including DPF, injector, ABS bleed, EPB, steering angle | Ford owners |
| 9210 Holden/GM | All-system, single brand | All systems | Oil, battery, ABS, TPMS, DPF regeneration, transmission learning. No injector coding | Holden and GM owners |
| 9160 Jeep/Chrysler/Dodge/Ram | All-system, single brand | All systems | ABS bleed, EPB, DPF, injector. 2018-on vehicles need a gateway bypass cable | Jeep, Chrysler, Dodge and Ram owners |
| 9770 Mercedes-Benz | All-system, single brand | All systems, including hybrid and EV models | DPF, injector, transmission | Mercedes-Benz, Sprinter and Smart owners |
| DM5100 | All-system, multi-brand | All systems on Toyota, Ford, VW, Jeep/Chrysler/Ram, Holden/GM | Service resets, DPF, injector. More brands can be added | Households or home mechanics with several brands |
| DM5100-2 | All-system, multi-brand | All systems on Nissan, Toyota, Ford, Jeep/Chrysler/Ram, Holden/GM | Service resets, DPF, injector. More brands can be added | Mixed fleets that include a Nissan |
Which Autophix scanner do you need?
Here is the range sorted by need, with the limits of each tool spelled out.
A glovebox code reader for the check engine light

If the job is "find out why the check engine light is on", start with the OM123. It reads and clears engine codes, shows live data, readiness monitors and freeze frame data, and reads the VIN. It supports all five OBD2 communication protocols and is aimed at Australian vehicles from 2006. It needs no phone, no app and no account, so anyone in the family can use it.
For a Japanese-market import, choose the OM127. It does everything the OM123 does and adds JOBD, but only on vehicles with the 16-pin port.
Limits: both read the engine only. They won't read an ABS or airbag light or do service resets. See all code readers.
A Bluetooth scanner for your phone

The 3210Pro is a small adapter that stays in the port while you read codes and live data on your phone. On some makes (Ford, GM, Chrysler, Toyota and Mercedes) it also reads ABS, airbag and transmission codes, which no code reader in the range does. It includes a basic voltage check.
Limits: ABS, airbag and transmission coverage is make-dependent, so check your make against the product page. You need a compatible phone. Unplug it when the car is parked for long periods, as with any plug-in adapter. More options in Bluetooth OBD2 scanners.
Battery testing as well as codes

Plenty of warning lights and no-start problems come back to a tired battery or a charging fault. The BT500 Pro reads engine codes and runs a full battery, cranking and charging test. It handles flooded, AGM, gel and EFB batteries, and the cranking test works on 12V and 24V systems. That makes it a practical choice for a dual-battery 4WD, a caravan setup or a small fleet with trucks.
Limits: engine codes only on the diagnostic side. See car battery testers.
A scanner for touring
On a remote trip, the useful question is often "can I keep driving to the next town, or do I need help?" A code reader in the glovebox answers part of that. The Outback 9000 has a colour screen, a rubber cover, and shows the likely cause of an engine code on screen, so you don't need phone reception to look the code up. It also has a basic voltage check.
Things to think about for touring:
- No reception: a handheld with on-screen descriptions works anywhere. A phone app may need data to look up some information.
- Heat and dust: store the scanner in its case or a zip bag in the glovebox, away from the dash top and direct sun.
- Corrugations: a loose scanner bouncing around a drawer or tub will suffer. Pack it with clothes or in a padded pouch.
- Batteries: if you run a dual-battery system, the BT500 Pro covers battery and charging checks too.
- Security: the diagnostic port is one route used in keyless car theft. An Aerpro OBD2 port lock is a metal lock that covers the port when you're not using it.
Limits: the Outback 9000 reads engine codes only. For a diesel with a DPF, consider a brand scanner that can run a regeneration. Browse the 4WD touring range.
A single-brand pro scanner
If you own one brand and want to do more than read the engine, an all-system scanner for that brand is the next step. These reach the ABS, airbag, transmission and body computers, and run service functions.
- 9360 Toyota: all systems, oil, EPB, steering angle and TPMS resets, DPF and injector coding. Suits LandCruiser, Prado and HiLux owners.
- 9150 Ford: all systems and more than 30 functions, including DPF, injector, ABS bleed, EPB and steering angle.
- 9210 Holden/GM: all systems, oil, battery, ABS, TPMS, DPF regeneration and transmission learning. It does not do injector coding.
- 9160 Jeep/Chrysler/Dodge/Ram: all systems, ABS bleed, EPB, DPF and injector. Vehicles from 2018 have a security gateway and need a gateway bypass cable.
- 9770 Mercedes-Benz: Mercedes-Benz, Sprinter and Smart, including hybrid and EV models. All systems, DPF, injector and transmission.
Limits: each covers its own brand only. Service functions such as injector coding and ABS bleeding need the right parts, procedure and care, and some jobs still belong with a workshop. Reading an airbag code is fine; repairing the airbag system is work for a professional. See all professional scanners.
A multi-brand scanner

Households with a Toyota and a Ford, or a home mechanic who works on friends' cars, can cover several brands with one tool. The DM5100 does all-system diagnostics, service resets, DPF and injector functions on Toyota, Ford, VW, Jeep/Chrysler/Ram and Holden/GM. The DM5100-2 is the same with Nissan in place of VW. More brands can be added to either.
There is no Nissan-only scanner in the range, so for a Navara, Patrol or X-Trail, the DM5100-2 is the one to look at.
Limits: only the listed brands are covered out of the box. Check what adding another brand involves before you rely on it. Brand collections: Toyota, Ford, Holden/GM, Jeep/Chrysler/Ram, Nissan, Mercedes-Benz and Volkswagen.
When a scanner isn't enough
A scanner helps you understand a fault. Some faults mean you should stop and get help, whatever the code says.
- Flashing check engine light: this usually means a severe misfire that can damage the catalytic converter. Slow down, pull over when it's safe, and get the car checked before driving further.
- Limp mode: if the car suddenly loses power, get off the road safely first and scan second. See our limp mode guide.
- Brake faults: a red brake warning, a soft pedal or a brake fault code means don't drive.
- Airbag (SRS) faults: reading the code is fine, but repairs to the airbag system are work for a qualified professional.
- Before you clear anything: write down or photograph every code and the freeze frame data first. Clearing codes erases the evidence a mechanic may need.
Frequently asked questions
Will an OBD2 scanner work on my car?
Most likely, if it's a petrol car built from 2006 or a diesel from 2007 and sold new in Australia. That's when ADR 79/01's on-board diagnostic rules applied to all new light vehicles. Many earlier cars and imports also work. Find the 16-pin port under the dash, then check the build date.
Can a cheap code reader read the ABS or airbag light?
No. Code readers such as the OM123, OM127, Outback 9000 and BT500 Pro read engine codes only. For ABS and airbag codes you need the 3210Pro on supported makes (Ford, GM, Chrysler, Toyota, Mercedes) or an all-system scanner for your brand.
Do I need a special scanner for a Japanese import?
Many Japanese-market imports use JOBD, Japan's version of on-board diagnostics. The OM127 adds JOBD support on vehicles with the standard 16-pin port. Older imports with a different-shaped plug won't connect to any scanner in this guide.
Which scanner is best for a 4WD trip?
A handheld that works without phone reception, such as the Outback 9000, suits the glovebox. If you run a dual-battery system, the BT500 Pro adds battery and charging tests. For a diesel with a DPF, a brand scanner that can run a regeneration covers more ground.
Can a scanner do a DPF regeneration?
Code readers can't. The brand scanners (9360, 9150, 9210, 9160, 9770) and the DM5100 range include DPF functions. See our DPF regeneration guide before you start one.
Will clearing a code fix the problem?
No. Clearing switches the light off and erases the stored data, but the fault is still there. If the cause isn't fixed, the code and the light will come back. Record the codes first.
Sources
- Vehicle Standard (Australian Design Rule 79/01: Emission Control for Light Vehicles) 2005, Federal Register of Legislation
- On-Board Diagnostic II (OBD II) Systems Fact Sheet, California Air Resources Board
- Frequently Asked Questions About On-Board Diagnostics (EPA 420-F-97-003), US Environmental Protection Agency
- What do my car dashboard warning lights mean?, RACV
- SAE J1962 Diagnostic Connector, SAE International