Autophix BT500 Pro with battery clamps

Autophix BT500 Pro OBD2 Scanner and Battery Tester

$269.95
Skip to product information
Autophix BT500 Pro with battery clamps

Autophix BT500 Pro OBD2 Scanner and Battery Tester

Checking engine faults and your battery, starter and alternator.

$269.95

Will it work on my car?

Choose this if

  • You want to test battery health, cranking and charging, not just read codes
  • You run flooded, AGM, gel or EFB batteries
  • You want to check 24V cranking systems as well as 12V

Consider instead

View store information

Autophix BT500 Pro OBD2 Scanner and Battery Tester

The BT500 Pro combines a full OBD2 scanner with a proper battery and charging-system tester. One tool diagnoses engine faults and tells you whether your battery, starter or alternator is the problem.

Battery, cranking and charging tests

  • Clamps straight onto the battery terminals
  • Tests 12V batteries: regular flooded, AGM flat plate, AGM spiral, gel and EFB
  • Shows battery health, state of charge, voltage, internal resistance and rated CCA
  • Cranking test on 12V and 24V systems
  • Charging (alternator) test under load and without load, including ripple

OBD2 functions

  • Reads and clears fault codes, with definitions on screen
  • Live data: O2 sensors, RPM, coolant temperature, vehicle speed and more
  • Freeze frame, emissions (I/M) readiness with a one-touch button, EVAP and on-board monitor tests
  • Vehicle information (VIN, CIN, CVN)
  • Printable diagnostic reports via a computer
  • Multilingual menus and code definitions

Vehicle compatibility

Works on most OBD2-compliant vehicles with a 16-pin diagnostic port.

  • Australian and New Zealand vehicles: 2006 and newer
  • North American vehicles: 1996 and newer
  • European vehicles: 2001 and newer (petrol), 2004 and newer (diesel)

Specifications

  • Display: 2.8" colour TFT
  • Power: 6 to 30V, supplied by the vehicle battery
  • Operating temperature: 0 to 50°C
  • Includes alligator clips

You may also like