Car Battery Testers

Test battery health, cranking and charging on 12V and 24V systems. Works with flooded, AGM, gel and EFB batteries, and reads engine fault codes as well.

How to choose

For drivers who want to check the battery, starter and alternator before a trip, not just read fault codes.

What do you drive? We'll show what fits.

Skip to results list

Active filters:

1 item
Column grid
Column grid

Filter

Active filters:

  • Autophix BT500 Pro OBD2 Scanner and Battery Tester

    Autophix BT500 Pro OBD2 Scanner and Battery Tester

    Checking engine faults and your battery, starter and alternator.

    $269.95

Car battery tester guide

A voltage reading only tells you part of the story. A battery can show 12.6V and still fail on a cold morning. The BT500 Pro measures battery health, state of charge, internal resistance and cold cranking amps (CCA), then tests the starter and the alternator, so you know which part is at fault.

It's also a full OBD2 scanner, so the same tool reads engine fault codes.

Battery testing compared

ModelPriceBattery testCranking testCharging testFault codesConnects by
BT500 Pro$269.95Health, state of charge, voltage, internal resistance, CCA. Flooded, AGM, gel and EFB12V and 24VUnder load and no load, including rippleEngine, with definitionsClamps on the battery, plus the OBD2 port
Outback 9000$259.95Basic voltage checkNoNoEngine, with likely causesOBD2 port
3210Pro$139.95Basic battery checkNoNoEngine. ABS and airbag on some brandsOBD2 port, through your phone

The BT500 Pro tests 12V batteries and runs cranking tests on 12V and 24V systems.

Problems a battery tester helps solve

  • The car won't start Find out whether it's the battery, the starter or the alternator before you buy parts.
  • Slow cranking on cold mornings Compare the battery's measured CCA with its rating to see if it's on the way out.
  • Battery warning light on the dash Run the charging test to check the alternator, with and without load.
  • Flickering lights or electrical faults The ripple test can point to an alternator fault.
  • Deciding whether to replace a battery Check its health before you pay for a new one.
  • An auxiliary battery that won't hold charge Test AGM, gel and EFB batteries as well as regular flooded ones.

Common uses

  • Before winter or a long trip. Test the battery and charging system before they let you down.
  • After a jump start. Check whether the battery is worth keeping, or the alternator is the real problem.
  • Dual-battery 4WD setups. Test the starting and auxiliary batteries one at a time.
  • Trucks and 24V systems. Run the cranking test on 24V systems.

Common mistakes to avoid

  • Testing straight after charging or driving. Surface charge can make a weak battery look healthy. Let it rest before you test.
  • Choosing the wrong battery type. Select flooded, AGM flat plate, AGM spiral, gel or EFB to match the battery, or the result won't be accurate.
  • Entering the wrong CCA rating. Use the CCA printed on the battery label. The test compares the battery against it.
  • Testing a 24V bank as one battery. The battery test is for 12V batteries. Test each one on its own.
  • Dirty or loose terminals. Clean the terminals and clamp firmly onto the lead posts, or you'll get a false reading.

Frequently asked questions

What does CCA mean?
Cold cranking amps: how much current a battery can deliver to start an engine in cold conditions. It's printed on the battery label.
Which batteries can it test?
12V regular flooded, AGM flat plate, AGM spiral, gel and EFB batteries.
Can it test lithium batteries?
Lithium isn't in its list of supported battery types.
Can it test 24V systems?
It runs the cranking test on 12V and 24V systems. Test each battery in a 24V bank on its own.
Does it read fault codes too?
Yes. It's a full OBD2 scanner that reads and clears engine codes, with definitions, and shows live data.
Can I print the results?
Yes, when it's connected to a computer.