OBD2 Code Readers

Simple, affordable scanners for reading and clearing check engine light codes. Includes handheld code readers and a Bluetooth adapter that works with your phone.

How to choose

For drivers who want to know why a warning light is on and turn it off. All three read engine codes on any OBD2 vehicle from 2006.

What do you drive? We'll show what fits.

Skip to results list

Active filters:

3 items
Column grid
Column grid

Filter

Active filters:

  • Autophix OM123 OBD2 Code Reader

    Autophix OM123 OBD2 Code Reader

    Finding out why the check engine light is on.

    $84.95
  • Autophix 3210Pro Bluetooth OBD2 Scanner

    Autophix 3210Pro Bluetooth OBD2 Scanner

    Reading fault codes and live data on your phone.

    $139.95
  • Autophix OM127 OBD2 Code Reader for Japanese Vehicles

    Autophix OM127 OBD2 Code Reader for Japanese Vehicles

    Engine codes on Japanese imports as well as standard OBD2 cars.

    $154.95

Choosing an OBD2 code reader

A code reader plugs into your vehicle's OBD2 port and tells you why the check engine light is on. It reads the fault code, shows what it means and lets you turn the light off once the problem is fixed.

Code readers focus on the engine. The 3210Pro also reads transmission, ABS and airbag codes on Ford, GM, Chrysler, Toyota and Mercedes. For every system on your vehicle, plus service jobs such as an oil reset or DPF regeneration, see our professional scan tools.

Code readers compared

ModelPriceScreenSystems readLive dataExtrasBest for
OM123$84.95Built-in mono screenEngineYesFreeze frame, I/M readiness, VIN. No batteries neededA simple reader for any OBD2 car
3210Pro$139.95Your phone or tablet (iOS, Android)Engine. Transmission, ABS and airbag on Ford, GM, Chrysler, Toyota and MercedesYesBattery check, trip analysis, performance test, reportsResults on your phone
OM127$154.95Built-in mono screenEngine, including Japanese JOBD codesYesFreeze frame, I/M readiness, VIN, online updatesToyota, Honda, Mazda, Nissan, Subaru and other Japanese cars

All three work on OBD2 vehicles with a 16-pin port: Australian and New Zealand vehicles from 2006. They support every OBD2 protocol: CAN, J1850 PWM, J1850 VPW, ISO9141 and KWP2000.

Problems a code reader helps you solve

  • The check engine light is on Read the code and its meaning, so you know whether it's something simple like a loose fuel cap or a job for a mechanic.
  • The light came back after a repair Read the code again to see whether the fix worked, then clear it.
  • The engine feels rough or uses more fuel Check live data such as engine speed, coolant temperature and oxygen sensor readings to see what the engine is doing.
  • You're about to buy a used car Check for stored and pending codes, and whether the readiness monitors are complete. Incomplete monitors can mean codes were cleared recently.
  • You don't want to walk into a workshop blind Know the code before you book in, so you can describe the fault and understand the quote.

Common uses

  • Keep one in the glovebox. The OM123 and OM127 are powered by the car's port, with no batteries to go flat, so they're ready when a light comes on.
  • Check before a long drive. Scan for pending codes. These are faults the car has seen but not yet confirmed, and they can show up before the light does.
  • Look after every car in the household. One reader works across every OBD2 vehicle you own, whatever the brand.
  • Send results to your mechanic. The 3210Pro shows results on your phone and creates diagnostic reports you can keep or pass on.

Common mistakes to avoid

  • Clearing the code without fixing the cause. Clearing turns the light off, but if the fault is still there it will come back.
  • Not writing the code down. Note or photograph every code and the freeze frame data before you clear anything.
  • Expecting ABS or airbag codes from an engine reader. The OM123 and OM127 read engine codes only. An ABS or airbag light needs the 3210Pro on supported brands, or a professional scan tool.
  • Ignoring a flashing check engine light. A flashing light usually means the engine is misfiring. Ease off and get it checked soon, as driving on can damage the catalytic converter.
  • Reading with the ignition off. Turn the ignition on, or start the engine, before you read codes. With the ignition off, the reader can't talk to the car.
  • Assuming any 16-pin port means OBD2. Some Australian vehicles built before 2006 have the port but don't fully support OBD2. Check your owner's manual if your car is older.

Frequently asked questions

Will a code reader work on my car?
If your vehicle was sold in Australia or New Zealand from 2006 onwards and has a 16-pin OBD2 port, yes. All three readers support every OBD2 protocol.
Where is the OBD2 port?
Usually under the dashboard on the driver's side, near the steering column. On some vehicles it's behind a small cover. Your owner's manual shows the exact spot.
Can a code reader turn off the check engine light?
Yes. All three clear engine codes and turn the light off. If the fault is still there, the light will come back on.
What's the difference between generic and manufacturer codes?
Generic codes, such as P0420, mean the same thing on every vehicle. Manufacturer-specific codes are set by the carmaker. The OM123 and OM127 read both, and the OM127 also reads JOBD codes used on Japanese vehicles.
What is a pending code?
A fault the car has detected but not yet confirmed. It may not have turned the light on yet, so it's an early warning worth checking.
Do I need the phone version?
Only if you'd rather read results on your phone. The 3210Pro has no screen of its own and uses the Autophix app on iOS or Android. The OM123 and OM127 have their own screens.
Does it need batteries or charging?
No. All three are powered by the vehicle through the OBD2 port.